Instrument

Available for gauge, absolute and differential pressure, flow and level measurement. Highly accurate and suitable for HART, PROFIBUS- PA and FOUNDATION FIELDBUS interface.
[popup_anything id="5791"]

TEMPERATURE TRANSMITTER

Temperature Transmitter is 2 wire system available in Head / Field / Rail Mounting.Available with HART, PROFIBUS- PA and FOUNDATION FIELDBUS communication.

ULTRASONIC LEVEL TRANSMITTER

SITRANS Probe LU240 / Probe LU flow measurement. It works with liquid, slurries and bulk material up to 12 mtr. (40 ft.) Communication using HART. Low power and current start up.

ECHOMAX XPS / XRS transducer are Ultrasonic technology to measure level up to 30m (100ft) & can resist temperature up to 95 deg C. It is suitable for liquids as well as solid application.

SITRANS LUT400 Series is Ultrasonic Controller mainly used for remote version model with separate Ultrasonic transducer. These models are available with HART Protocol & Relay output.

RADAR LEVEL TRANSMITTER

SOLID APPLICATION

SITRANS LR560 2 (FMCW) Radar level transmitter are suitable for extremely difficult application. 78 GHz provide very narrow beam angle of 4 deg. Measuring range up to 100 meter with LDI features.

LIQUID APPLICATION

SITRANS LR250 is a 2 wire, 25 GHz horn antenna type pulse radar level transmitter for continuous level measurement of liquid and slurries in storage and process vessels. Measuring range up to 20 Mtrs (66 ft.)

GUIDED WAVE RADAR

SITRANS LG Series is a guided wave radar transmitter for level and volume measurement of liquids and solids. The various probes are available like coaxial, flexible single, and twin type rods etc. Application- Hydrocarbon processing, Interface / level measurement, high temperature and pressure application.

CAPACITANCE TYPE

Pointek CLS100/CLS200/CLS300: Powerful range of level switches suitable for a variety of industries with optional rod/cable choices and configurable output, ideal for detection of liquids, solids, slurries, foam.

ELECTROMAGNETIC FLOW TRANSMITTER

SITRANS FM MAG 5100W is an Electromagnetic Flow sensor designed with 1 to 78” (2000 mm) Line size on HART, PROFIBUS- PA and FOUNDATION FIELDBUS interface. Application are waste water, drinking water, ground water etc.
SITRANS FM MAG 3100 is mainly used in chemical application, temperature limits up to 180 deg. C (356 deg F)
MAG8000 is a battery operated, comprehensive meter with intelligent information and high performance flow measurement facilities.

ULTRASONIC CLAMP ON FLOW METER

SITRANS FS230/SITRANS FS220: SITRANS F S clamp-on ultrasonic flowmeters provide highly accurate measurement while minimizing installation time and maintenance expense. Based on latest technology these dedicated flowmeters are suitable for a wide variety of liquid applications like Water, Wastewater, HVAC, Power, Process Industry, Hydrocarbon etc.

CORIOLISS MASS FLOW METER

SITRANS FC is a digitally based Corioliss flow solution featured with high compactness and high accuracy of 0.1%

MOTION SENSORS

The motion sensors provide the contacts to shut down machinery whenever under speed, over speed or plant equipment failure occurs. Its reliability makes it a cost effective way to protect valuable process equipment by providing continuous monitoring with alarm.

ELECTROPNEUMATIC SMART POSITIONER

The SIPART PS2 electro pneumatic smart positioner is use to control the final control element of pneumatic linear or part turn actuators. Available in makrolon, stainless steel or aluminum enclosure as well as flameproof aluminum enclosure (Ex d)

BELT SCALE

Belt scale help to maximize the use of raw materials, controls inventories and aid the manufacturing of a consistent products. A typical belt scale structure build with load cell, Electronic integrator and belt speed sensor.
Load cell:Siwarex WL series load cell BB- S SA100 Kg/C3- rated load 100 Kg- accuracy class C3- 3 M cable length, 4 conductor- material stainless steel- degree of protection IP68. Electronic Integrator:Milltronics BW500 A full features, power full integrator designed for use with both belt scales and weight feeder.

SOLID FLOW METER

SITRANS WF Solid Flow meter monitor the rate of gravity fed bulk material flow in a process. It is low to high capacity flow meter for various product size, density in restricted space.
Application- Cement, Fly- ash, Gravel, Iron Ore, Coke, Coal, Minerals, Cereals, Seeds, Grains, Rice hulls and many more…

ACOUSTIC SENSOR

SITRANS AS100 detects changes in high frequency sound waves from equipment and materials in motion. It detects and reacts instantly to changes in solid flow to warn of blockages.

BW SOLO

Single gas detector for any single gas hazard within its wide range of available toxic gas. Bluetooth enable (optional) for remote monitoring.

BW ULTRA

Multi Gas detector with optional Blue tooth and big display. Suitable for any gas. Five Gas detector.

GAS ALERT MAX XT-II

GAS ALERT MAX XT-II is the smart simple economical way to compliance reliably monitors up to four hazards gas.

MULTI RAE LITE

Multi Gas Detector with PID Sensor for VOC Gase and IR Sensor for flammable gase.

SENSE POINT XCD

Sensepoint XCD provides comprehensive monitoring of combustible, toxic and oxygen gas hazards.

SEARCHLINE EXCEL

Open Path Infrared Gas Detector Fast response provides earliest warning. High Sensitivity allows low alarm set points works in inert atmosphere.

SENSEPOINT XCD RFD

It is a remote flammable detector has been specifically designed for use with remotely mounted flammable gas sensors.

TOUCHPOINT PLUS

A controller for use with anyone of the sense point range of gas detectors providing 24 hrs protection from flammable , toxic or oxygen gas hazards.

UNIPOINT

DIN rail mounted offering a flexible and low cost solution to incorporate flammable toxic or oxygen gas detection into control systems.

FIRE AND FLAME DETECTOR

Multi Spectrum Triple IR , UV, Dual IR/VIS Fire and Flame detector with UV solar blind sensors with highest fire detection performance and optional false alarm rejection.

PORTABLE FLUE GAS ANALYSER

It measure flue gas- CO, CO , NO, NO , 2 2 SO , H S, SOx, NOx) 2 2 Data transfer facility, no calibration of sensor is require at site Peltier cooling facility of sensor for accurate measurement.

THERMAL IMAGER

Very usefull instrument for preventive maintenance in electrical, mechanical, condition monitoring, operation, energy management and inspection. Wide variety of models available to suite different application.

DEWPOINT TRANSMIITER

Compressed air and gases are used in all areas of industry. Humidity and moisture are generally undesirable because they can cause damage or impair the quality of the end product. The use of measuring and control technology is recommended in order to monitor humidity in the network and prevent damage.

TEMPERATURE MEASUREMENT

– Infrared (IR) thermometer for fast, non-contact temperature measurement of surface temperature.

– Temperature measurement with very high accuracy. Wide range of probe options for different application.

HUMIDITY MEASUREMENT

Measuring range 0 to +100%rh.-10 to 60 degree C Accuracy : (+/-) 2.5% RH (+5 to 95%RH). For temperature relative humidity, Wet bulb.

AIR VELOCITY MEASUREMENT

Measurement of air flow, flow and direct display16mm Telescope vane probe / Thermal probe / Large area vane probe, Max / Min / Hold function.

MEASURING INSTRUMENTS FOR HVAC, REFRIGERATION, FACILITY MANAGEMENT

Temperature, Pressure, Air velocity, Humidity, Refrigeration measurement.

DATA LOGGERS

For measurement and recording of different values like temperature, humidity. Available in various different models as per application needs.

ELECTRICAL MEASUREMENT MULTIMETER, CLAMP METER, CURRENT / VOLTAGE TESTER

User-friendly measuring instruments with easy handling ensure precise and secure measurement of electrical parameters such as current, voltage or resistance.

MEASURING INSTRUMENTS FOR FOOD

(Temperature, pH, Cooking Oil Tester, Data Loggers etc.)

CURRENT TO PNEUMATIC CONVERTERS

Fairchild make Current to Pneumatic (I/P) Converter. Available with different combination of input and output signals.

THAMES SIDE LOAD CELLS FOR PROCESS WEIGHING

Thames Sensors have Bending Beam (T66), Shear Beam (T85) and Compression (T34) load cells available for process weighing applications. Thames Sensors also manufacture Junction boxes, weighing accessories and electronics to provide control over the process weighing operations.

LOAD CELL TESTER

Quickly diagnose problem with load cell.

OPTIKA ITALY

Microscopes available in large variety for different application like educational, laboratory, inspection and Metallurgical. Highly accurate and with latest features.

PPI

Process Indicator / Controller suitable for various process parameters like Temperature, Humidity, DC Linear mA/mV/V .

– Fully programmable, Retransmission output / Serial Communication port.
Scanner, Multi Channel with input as Temperature, Humidity, DC Linear mA/mV/V .

– Fully programmable, Retransmission output / Serial Communication port.

-Data Logger with USB Port facility.